Free Cisco CCNA Lab – Redistribution of RIP, IGRP and OSPF

Redistribution of RIP, IGRP and OSPF

These labs are not as good as the labs in our full blown CCNA Lab Workbook.  The labs in our full blown CCNA lab workbook include theory as we step you through each lab, detailed information on why you are entering each command and review questions and answers at the end of the labs.  So these labs are ok for free…but we offer a much better product consisting of 60 labs covering 400 pages of CCNA material to help you pass your CCNA Certification Exam in the workbook at this link CCNA Lab Workbook!

 

Objective:

In this lab you will redistribute the dynamic routing protocols RIP, IGRP and OSPF.  You will then run basic testing commands to verify all links and protocols are working properly.

Hardware Requirements:

· Two Cisco routers with one Ethernet port and one serial port

· Two Cisco routers with two serial ports

· Cisco IOS 12.0 or higher

· A PC running a terminal emulation program

· Three back to back DTE/DCE serial cables

· Cisco console kit

Router Configurations

Router 1

Router#conf t

Router(config)#hostname R1

R1(config)#enable password cisco

R1(config)#line vty 0 4

R1(config-line)# password cisco

R1(config-line)# login

R1(config)#int Loopback0

R1(config-if)# ip address 1.1.1.1 255.255.255.255

R1(config-if)# no shut

R1(config)#int s0

R1(config-if)# ip address 10.1.1.1 255.0.0.0

R1(config-if)# no shut

R1(config-if)# clockrate 64000

R1(config)#int s1

R1(config-if)# ip address 11.1.1.1 255.0.0.0

R1(config-if)# no shut

R1(config-if)# clockrate 64000

R1(config-if)#router ospf 100

R1(config-router)# redistribute rip

R1(config-router)# network 10.0.0.0 0.255.255.255 area 0

R1(config)#router rip

R1(config-router)# redistribute ospf 100

R1(config-router)# network 1.0.0.0

R1(config-router)# network 11.0.0.0

R1(config-router)# default-metric 2

R1(config)#no ip classless

R1(config)#end

R1# wr

Router 2

Router#conf t

Router(config)#hostname R2

R2(config)#enable password cisco

R2(config)#line vty 0 4

R2(config-line)# password cisco

R2(config-line)# login

R2(config)#int Loopback0

R2(config-if)# ip address 2.2.2.2 255.255.255.255

R2(config-if)# no shut

R2(config)#int Loopback1

R2(config-if)# ip address 2.2.2.1 255.255.255.255

R2(config-if)# no shut

R2(config)#int Loopback3

R2(config-if)# ip address 20.20.20.20 255.0.0.0

R2(config-if)# no shut

R2(config)#int s0

R2(config-if)# ip address 10.1.1.2 255.0.0.0

R2(config-if)# no shut

R2(config)#int s1

R2(config-if)# ip address 12.1.1.2 255.255.255.0

R2(config-if)# no shut

R2(config)#router ospf 100

R2(config-router)# redistribute igrp 200 subnets

R2(config-router)# network 2.2.2.2 0.0.0.0 area 0

R2(config-router)# network 10.0.0.0 0.255.255.255 area 0

R2(config)#router igrp 200

R2(config-router)# redistribute ospf 100 metric 200000 5 100 200 100

R2(config-router)# network 12.0.0.0

R2(config-router)# network 20.0.0.0

R2(config)#no ip classless

R2(config)#end

R2#wr

Router 3

Router#conf t

Router(config)#hostname R3

R3(config)#enable password cisco

R3(config)#line vty 0 4

R3(config-line)# password cisco

R3(config-line)# login

R3(config)#int Loopback0

R3(config-if)# ip address 3.3.3.3 255.255.255.255

R3(config-if)# no shut

R3(config)#int Loopback1

R3(config-if)# ip address 3.3.3.4 255.255.255.255

R3(config-if)# no shut

R3(config)#int e0

R3(config-if)# ip address 193.1.1.3 255.255.255.0

R3(config-if)#no keepalive

R3(config-if)# no shut

R3(config)#int s0

R3(config-if)# ip address 11.1.1.3 255.0.0.0

R3(config-if)# no shut

R3(config)#router rip

R3(config-router)# network 3.0.0.0

R3(config-router)# network 11.0.0.0

R3(config-router)# network 193.1.1.0

R3(config)#no ip classless

R3(config)#end

R3# Wr

Router 4

Router#conf t

Router(config)#hostname R4

R4(config)#enable password cisco

R4(config)#line vty 0 4

R4(config-line)# password cisco

R4(config-line)# login

R4(config)#int Loopback0

R4(config-if)# ip address 4.4.4.4 255.255.255.255

R4(config-if)# no shut

R4(config)#int e0

R4(config-if)# ip address 192.168.1.4 255.255.255.0

R4(config-if)#no keepalive

R4(config-if)# no shut

R4(config)#int s0

R4(config-if)# ip address 12.1.1.4 255.0.0.0

R4(config-if)# clockrate 64000

R4(config-if)# no shut

R4(config)#router igrp 200

R4(config-router)# network 4.0.0.0

R4(config-router)# network 12.0.0.0

R4(config-router)# network 192.168.1.0

R4(config)#no ip classless

R4(config)# end

R4# wr

 

Testing the Configuration

Router 1

R1#sh ip route

(Output omiited)

Gateway of last resort is not set

1.0.0.0/32 is subnetted, 1 subnets

C 1.1.1.1 is directly connected, Loopback0

2.0.0.0/32 is subnetted, 1 subnets

O 2.2.2.2